Clean Bottom Fabric and Vinyl Cutter For Tumbler Making
This Fabric and Vinyl Cutter is set up to cut from around 1/8 to 1 inch. Each gap goes up around 1/8 in with each slot. The cutter is designed to hold a single-edge industrial razor blade about 1.5 inches long. The blade is inserted in through the front and needs to be pushed fully in. It does not require a ton of pressure, it just needs to be wedged into the back of the tool. The V in the back of the cutter allows you to pop out the blade with your finger easily.
Razer blades are not Included.
Original: $10.00
-70%$10.00
$3.00More Images
Clean Bottom Fabric and Vinyl Cutter For Tumbler Making
This Fabric and Vinyl Cutter is set up to cut from around 1/8 to 1 inch. Each gap goes up around 1/8 in with each slot. The cutter is designed to hold a single-edge industrial razor blade about 1.5 inches long. The blade is inserted in through the front and needs to be pushed fully in. It does not require a ton of pressure, it just needs to be wedged into the back of the tool. The V in the back of the cutter allows you to pop out the blade with your finger easily.
Razer blades are not Included.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This Fabric and Vinyl Cutter is set up to cut from around 1/8 to 1 inch. Each gap goes up around 1/8 in with each slot. The cutter is designed to hold a single-edge industrial razor blade about 1.5 inches long. The blade is inserted in through the front and needs to be pushed fully in. It does not require a ton of pressure, it just needs to be wedged into the back of the tool. The V in the back of the cutter allows you to pop out the blade with your finger easily.
Razer blades are not Included.
